PROJECT UPDATES

Underwater Hull Cleaning and In-Water Survey at Son Duong Port, Vietnam

Cập nhật: 18-08-2026 09:56:17 | PROJECT UPDATES | Lượt xem: 3057

Bacviet provides underwater hull cleaning and in-water survey services in Vietnam. See our propeller polishing and inspection project at Son Duong Port.

Bacviet Shiprepair provides professional underwater hull cleaning and in-water survey services in Vietnam, supporting shipowners, ship managers and vessels calling at ports, terminals and anchorages nationwide.

During a project at Son Duong Port in Ha Tinh Province, our commercial diving team completed an in-water inspection, propeller polishing and sea chest grating cleaning for the bulk carrier MV EQUINOX ORENDA. The work was performed while the vessel remained afloat, helping the Owner obtain clear visual evidence of the underwater condition without interrupting the vessel’s port schedule for dry-docking.

The inspection covered the submerged hull, propeller, propeller shaft, rope guard, rudder, bilge keels, sea chest gratings, cathodic protection components and underwater transducers. Underwater CCTV footage and photographs were recorded for the technical report.

in-water survey at Son Duong Port = Bacviet shiprepair company

Underwater inspection for vessel at Sonduong port, Vietnam 

Vessel Information

Vessel name

MV EQUINOX ORENDA

IMO number

9572082

Vessel type

Bulk carrier

Flag

Cayman Islands

Class

NK

LOA / breadth

197 m / approximately 32 m

Location

Son Duong Port, Ha Tinh, Vietnam

Operation date

2 April 2024

Scope of the Underwater Operation

Bacviet mobilized an experienced commercial diving team, a dive boat, underwater CCTV equipment and the required inspection and cleaning tools to Son Duong Port. The confirmed scope included:

  • Underwater visual inspection of the hull and appendages
  • Inspection of the bulbous bow, vertical sides, flat bottom and keel area
  • Inspection of the port and starboard bilge keels
  • Inspection of the five-bladed propeller, shaft, boss cone and rope guard
  • Propeller polishing on the pressure and suction sides of all five blades
  • Inspection and cleaning of the high, low and emergency sea chest gratings
  • Inspection of the rudder, cathodic protection components, speed log and echo sounder
  • Underwater CCTV and photographic documentation
  • Preparation of a detailed underwater inspection report

Safety Preparation Before Diving

Before diving commenced, the vessel’s representatives and the diving supervisor completed a joint safety checklist. The main engine, propeller and steering gear were secured against unintended operation. Relevant pumps, underwater discharges, echo sounder, speed log and cathodic protection equipment were isolated where required. Diving signals were displayed, communications were established and personnel onboard were informed that diving operations were in progress.

Underwater Hull Inspection

The diving team inspected the vessel’s underwater hull plating from the bulbous bow to the stern, including the port and starboard vertical sides, flat-bottom areas, keel plating and visible weld seams below the waterline. No apparent structural damage or visible cracks were observed in the inspected areas. The underwater coating was generally found in good visual condition, without significant peeling, blistering, cracking, corrosion or grounding damage recorded in the report.

IN-WATER SERVEY AT SON DUONG PORT - BACVIET SHIPREPAIR

Underwater visual inspection of the vessel’s hull plating and coating.

Bilge Keels, Anodes and Cathodic Protection

Both bilge keels were visually examined for deformation, damage and cracking along their welded joints. No apparent damage or visible cracking was reported. Sacrificial anodes in the inspected areas were estimated to have approximately 50% remaining material. The visible ICCP components were also checked, with no apparent damage recorded.

UNDERWATER HULL INSPECTION AT SON DUONG PORT

Visual inspection of the bilge keel and adjacent hull structure.

Propeller Inspection and Polishing

The vessel was fitted with a five-bladed fixed-pitch propeller. Before polishing, the pressure and suction sides were assessed at approximately Rupert Scale Grade D. Bacviet’s divers polished all five blades to remove deposits and reduce surface roughness. Following polishing, the surfaces achieved approximately Rupert Scale Grade A.

The inspection found the five blades in normal visual condition, with no apparent cracks, tears, pitting, significant erosion or previous repair marks. No oil leakage from the propeller shaft and no rope or fishing-net entanglement were observed. The boss cone and cement covers were recorded as intact.

PROPELLER POLISHING AT SON DUONG PORT - BACVIET SHIPREPAIR

Propeller blade surface after underwater polishing by Bacviet Shiprepair.

A smoother propeller surface can reduce frictional losses and help the propulsion system operate more efficiently. Actual performance improvement depends on vessel condition, operating profile and the level of fouling before polishing.

Sea Chest Grating Inspection and Cleaning

The high, low and emergency sea chest gratings were inspected and cleaned. The gratings were recorded as intact and generally in fair condition. Minor soft marine growth was noted around the sea chest area and removed to help maintain an unobstructed seawater flow to the vessel’s cooling and auxiliary systems.

The report identified two sea chest doors on each side. As the seizing wires or locking pins were not recorded as fully intact, these arrangements should be checked by the vessel and monitored during the next inspection or scheduled dry-docking.

SEA CHECTS INSPECTION AND CLEANING AT SON DUONG PORT

Sea chest grating condition recorded during the underwater inspection.

Rudder and Stern-Area Inspection

The rudder plate, rudder stock, horn and visible stern-area components were checked for deformation, damage and cracking. No apparent structural damage or visible cracks were reported. The rudder plug was intact, and the rudder plating was assessed as satisfactory. The speed log and echo-sounder transducers were also found in good external visual condition.

Summary of Inspection Results

  • Underwater hull plating: no apparent damage recorded
  • Visible underwater weld seams: satisfactory condition
  • Hull coating: generally in good visual condition
  • Bilge keels: no apparent damage or visible cracks
  • Sacrificial anodes: approximately 50% remaining
  • Propeller: five blades in normal visual condition
  • Propeller surface: improved from Rupert Grade D to Grade A
  • Propeller shaft: no visible leakage or entanglement
  • Sea chest gratings: intact and cleaned
  • Rudder and underwater transducers: satisfactory visual condition

Underwater Hull Cleaning Services in Vietnam

Marine growth such as slime, algae, barnacles and other hard fouling increases hull roughness and may increase hydrodynamic resistance. Planned underwater hull cleaning can help maintain the condition of the submerged hull and support vessel performance between dry-dockings.

Bacviet Shiprepair provides underwater hull cleaning in Vietnam for vessels at ports and anchorages. Depending on hull condition, coating requirements, local permissions and environmental restrictions, our team can clean:

  • Vertical sides and flat-bottom areas
  • Bulbous bow and bilge keels
  • Rudder and stern areas
  • Propeller blades and boss cone
  • Sea chest gratings
  • Areas surrounding speed-log and echo-sounder transducers

Before cleaning, the diving team can conduct a CCTV inspection to assess the fouling type and coverage. The cleaning method is then selected according to the marine growth, antifouling coating condition, Owner’s instructions and applicable port and environmental requirements. Before-and-after photographs, underwater video and a service report can be supplied after completion.

Why Shipowners Choose Bacviet Shiprepair

  • 24/7 mobilization to ports and anchorages throughout Vietnam
  • Experienced commercial divers and diving supervisors
  • Underwater CCTV, photography and technical reporting
  • Combined inspection, cleaning, propeller polishing and repair services
  • Coordination with vessel representatives, local agents, terminals and Class when requested
  • Support at Son Duong, Vung Ang, Nghi Son, Cam Pha, Hai Phong, Da Nang, Dung Quat, Quy Nhon, Vung Tau, Cai Mep-Thi Vai and other locations nationwide

UNDERWATER HULL CLEANING FOR VESSEL AT SON DUONG PORT

Underwater inspection of the overboard holes 

Contact Bacviet for Underwater Services in Vietnam

For underwater hull cleaning, an in-water survey, propeller polishing or sea chest cleaning in Vietnam, please send the vessel name and IMO number, expected port and schedule, requested scope, recent underwater photographs if available, hull drawings and the local agent’s contact details.

Available 24/7 – Ship Repair & Marine Services at All Vietnam Ports
Service Areas: Hai Phong | Phu My | Dung Quat | Nghi Son | Cam Pha | Nationwide

8.1. BACVIET COMMERCIAL AND SHIPTECH JSC -  HEAD OFFICE:

+ No. 25/6/302 Van cao street – Haian District- Haiphong City

+ Mobile/ WhatsApp/ WeChat: +84 904 125 520

+ Email: bacviet@haiphongshiprepair.com

8.2. SHIP REPAIR SERVICES IN HO CHI MINH CITY (Saigon) - HCM CITY BRANCH:

+ No. 66 Dragon Village Phu Long - Phu Huu Ward, Dictrist 9 - Ho Chi Minh City

+ Mobile/ WhatsApp/ WeChat: +84 904 125 520

+ Email: bacviet@haiphongshiprepair.com. Email: Bacviettechco@gmail.com

8.3. SHIP REPAIR SERVICES IN DA NANG CITY - DA NANG CITY BRANCH:

No. 1109 AZURA Building, 339B Tran Hung Dao Street- Son Tra District - Da Nang City

Mobile/ WhatsApp/ WeChat: +84 904 125 520

Email: quangtrungpr@gmail.com

Upadeted: August 2025 by Mr. Le Quang Trung- Bacviet Projects Manager 

Copyright of this article belongs to Bacviet Ship Repair Company.