Projects update

ELECTRIC MOTOR REWINDING AT HONGAI PORT, VIETNAM

Cập nhật: 16-12-2022 11:22:48 | Projects update | Lượt xem: 353

We would like to introduce Baviet Commercial and Shiptechnical Company which is mentioned Haiphong Shiprepair Company. We company is a leading field of Repair, rewinding Electric Motor for all types of Vessels at the Ports and anchorages of Vietnam.

This Electric Motor of High Pressure Cleaning Machine is a project for MV WORLD PRIZE which is a Bulk Carrier that was built in 2021 (1 year ago) and is sailing under the flag of the United Kingdom. It's carrying capacity is 62496 t DWT once She arrived at Hon Gai anchorage of Vietnam on middle December 2022.

Our objectives are:

     - Satisfy all requests of the customers and customer's satisfaction is key for the sustainable development of the Company.

     - Quality of products and services are of essence.

     - Ensuring timely handover of products as promised.

     - Reasonable prices.

>>>> FIND DETAILED >>>>

What are we proceeded for Electric Motor repair/ rewinding at Hongai Port, Vietnam?

1/ How to transportation/ traveling for Electric Motor at Hon Gai anchorage:

     - Arrange boat service comes to the Vessel alongside at Hon Gai anchorage.
     - Company’s Engineer come on board to discuss with Ship Officer for the repair plan of Electric Motor.
     - Company’s Engineers are visual checking the Motor before landing.
     - Prepare lashing ropes and lifting eyes to transfer the Motor from Main Deck to the Boat services.
     - Use the Provision Crane to lift down Electric Motor to the Service Boat

IMAGE FOR REWINDING ELECTRIC MOTOR AT HONGAI PORT, VIETNAM

2/ What is Overhauling Electric Motor at Work Shop:

     - Visual checking Electric Motor.
     - Mega Ohm checking/ measuring.
     - Dismantling Motor.
     - Cleaning all components / Parts of Motor after dismantled.
     - Visual checking all parts of Motor after cleaned such as: Rotor surface condition, Rotor shaft journal condition, key and shaft key conditions, DE and NDE bearings condition. Bearing housing and both covers of Motor also checked and measured, sealing, dust sealing conditions, Impeller of Motor also carefully checked…. etc.
     - Checking/ Calculating Stator coils and diameter of wire which will be re-winded.
     - Use Enamel Wire Ei-EIW (220 ℃) - Made in Korea.
     - Stator inside surfaces must be clean and painting before insert new coils.
     - Rewinding Stator of Motor as following Shop’ procedure.
     - Re-varnish new coils.
     - Heating up Stator by special heating equipment which can adjusting temperatures in during heating Stator.

>>> Refer Workshop' Procedure>>>>

IMAGE FOR REWINDING ELECTRIC MOTOR  AT HONGAI PORT, VIETNAM

IMAGE FOR REWINDING ELECTRIC MOTOR  AT HONGAI PORT, VIETNAM

3/ How to Repair/ recondition/ modification Electric Motor at Workshop if found damage:

     - Reconditioning rotor Shaft journals (bearing positions).
     - Reconditioning bearing housings (DE & NDE bearing housings).
     - Recondition shaft key and key.
     - Repair heating coil.
     - Repair / modification connecting terminal.
     - Repair the crack of Motor’s covers.
     - Repair motor foundation.

4/ What are Checking/ testing Motor after overhauled at Workshop:

     - Mega Ohm (Insulations) to be checked/ measured and make it on the Shop Test Report.
     - Surge test.
     - Free load test must be arranged at workshop to check Stator Current (Ampere) for each phase.
     - Rotation of Motor must be checked.
     - Strange noise to be checked.
     - Cleaning Motor / cover it for transportation.

 IMAGE FOR REPAIR ELECTRIC MOTOR AT HON GAI PORT

IMAGE FOR REPAIR ELECTRIC MOTOR AT HON GAI PORT

5/ What are works on board of the Vessel:

     - Mega Ohm (Insulations) has been checked/ measured by Ship Officer.
     - Surge test.
     - Load test has been arranged after installed to the ship’ equipment by Ship Crew.
     - All repair/ rewinding documents has been reviewed/ checked and signed by Chief Engineer.
     - Submits all final document of the Motor to the Vessel such as: Work List Report, Photo Report, Shop Test Report.

6/ Where we can supply services for Electric Motor at the Ports and Anchorages of Vietnam:

We provide services for Electric Motor such as Rewinding, Repair, Reconditon, Modification or overhauling for the Vessel at Ports and anchorages of Vietnam.

     - Electric Motor Rewinding at Cam pha Port, Vietnam.
     - Electric Motor repairs at Lach huyen Port, Vietnam.
     - Rewinding Electric Motor at Cai lan Port, Vietnam .
     - Repair Electric Motor in Nghi son Port, Vietnam .
     - Electric Motor recondition in Hai phong Port, Vietnam.
     - Rewinding electric Motor in Vissai Port, Vietnam.
     - Electric Motor recondition in Son Duong Port, Vietnam. 
     - Electric Motor repairs at Dung quat Port, Vietnam.
     - Electric Motor repairs at Vinh Tan - Binh thuan Port, Vietnam.
     - Repair Electric Motor in Phu my Port, Vietnam.
     - Electric Motor Rewinding in Cai mep Port, Vietnam.
     - Electric Motor Rewinding in Quy Nhon Port, Vietnam.
     - Electric Motor Rewinding at Go Gia Port, Vietnam.
     - Electric Motor Repair in Thieng Lieng Port, Vietnam.

Also you can find our services for Electric Motor in Foreign Ports as Cambodia, Myanmar as below:

     - Rewinding Electric Motor in Sihanoukville Port of Cambodia.
     - Rewinding Electric Motor in Yangon Port of Myanmar.

 You may interest for INTERNAL AUDIT ISM - ISPS - MLC FOR VESSEL IN VIETNAM

Please kindly contact with us (24/7):

Bacviet Commercial and Shiptech Company

Add: 25/6/302 Vancao Street- Haian District - Haiphong City - Vietnam

Mobile/ WhatsApp/ WeChat: +84 904 125 520 (24/24); Fax: +84 2253 739 556

E-mail: bacviet@haiphongshiprepair.com; Website: haiphongshiprepair.com

VIDEO CLIP FOR REWINDING ELECTRIC MOTOR REWINDING AT CAM PHA PORT, VIETNAM